High Production Capacity Coil Width 500-1600mm Slitting Line
Machine Steel Slitting Machines
1. Where are We?
We sell products in the Middle East, Turkey, East Europe, Russia,
South and East Asia and South America. Our factories are in Wuxi,
which is just 100 km from Shanghai, just 45 min by the fast train.
We have rich technology in design and manufacture for different
requirements.
Our goal is to supply high quality products. We also try to
guarantee timely delivery, all around services at reasonable cost.
We have already established favorable relationships with many
clients around the world. Working to extend our presence
internationally, we are looking forward to cooperating with your
company for mutual benefit. Please feel free to contact us.
2. Technical Parameter
- Specifications:
- applied to: galvanized steel
- tensile strength:δb≤450Mpa,δS≤260Mpa
- thickness:0.5-4mm
- width:500-1600(Max)
- coil ID: φ508
- coil OD:φ1500(Max)
- weight :15T(Max)
- knife pivot diameter of slitting: φ220
- slitting blade:φ220Xφ360x15
- material of slitting blade:LD, hardness:HRC55°-60°
- Finished products parameters:
- width tolerance: ≤±0.03mm
- strips burr: ≤±0.2mm
- Max slitting strips: 0.5-1.5mm: 16 strips; 1.5-4mm: 6 strips
- Other parameters :
- power:380V/50Hz/3Ph
- line speed:0-60m/min
- the direction of the whole line: from right to left.
- area of the whole production line(about) 20m(L)X6m(W)
- people of operation: 1 technician and 2 general workers
3. Composed Device
- Hydraulic entry coil car
- Hydraulic cantilever de-coiler
- Hydraulic head cutting machine
- Loop 1
- Side guide device
- Slitting machine
- Scrap winder
- Loop 2
- Pre-dividing tension stand
- Hydraulic recoiler
- Hydraulic unload car
- Hydraulic system
- Electrical system
4. Machine Components
1. Hydraulic entry coil car
2. The paper rewinding machine
3. Hydraulic cantilever de-coiler
4. Press and pinch device
5. Hydraulic head cutting machine
6. Loop 1
7. Side Guide Device
8. Slitting Machine
9. Scrap winder
10. Loop 2
11. Pre-dividing tension evice
12. Hydraulic recoiler
13.Hydraulic Exit Coil Car
14. Hydraulic System
15. Electric Control System
5. Assembly and Commissioning:
One engineer will be dispatched to visit the Buyer’s workshop for
installing,commissioning and training of the Buyer’s Operation
personnel. The total cost involved will be determined within that
period of time. If the service duration is within fifteen(15)
working days then USD100/day for each person, and that the costs
for the two-way air tickets, feeding and accommodation in the
Buyer’s own country(or country where the installation is been done)
should be paid by the Buyer. If the installation of the plant
exceeds 15 working days, then additional payment of USD100/day for
each person should be paid for all our Service Technicians doing
the installation at the Buyer’s installation site. The Buyer has to
make sure that the pre-installation is being done in time and
properly in order to avoid wasting time and creating other
problems. During the installation and testing running of all the
equipments, the Buyer should provide auxiliary personnel to help
speed up the work at the Buyer’s installation site.
