Automatic Color Steel Sheet Polyurethame PU Sandwich Panel
Production Line With Double belt machine
1. Our EPS sandwich panel has the following characteristics: Light
dead weight, high mechanical strength, excellent shearing resistant
performance, strong corrosion resistance, high durability, and
weather fastness, etc.
2. The sandwich panel has excellent insulating performance: Heat
insulation, sound insulation, waterproof performance, etc.
3. It is easy to install and can be used many times over.
4. Nowadays, the EPS sandwich panel is wiely used for cleaning
workshops, industrial factory buildings, office buildings,
stadiums, villas, and public buildings, etc.
PU Sandwich Panel Technical Parameter
1.1 Uncoiler
a) hydraulic power: 2.2Kw
b) motor power: 3Kw
c) raw material: color steel sheet, aluminum sheet
d) innder diameter of coil: 500mm- 600mm
d) outer diameter of coil: 1200mm
e) coil weight: 10T
f) sheet thickness: 0.3-0.8mm
g) sheet width: 1250mm
f) uncoil speed: 1.5-12m/min
g) hydraulic pressure: 6.3Mpa
1.2 Coil Car
a) hydraulic cylinder lift stroke: up panel 0.5m, down panel 0.5m
b) coil car stroke: 2.5m
1.3 Two sets of steel sheet transverse cutting machines
a) cut steel sheet according to certain length
b) two sets of PVC film covering device wich applies the PVC film
onto the steel sheet
1.4 Roll Forming Machine
a) Motow power: up panel 4Kw, down panel 7.5Kw
b) roll forming speed: 1.5-12m/min
c) roller material: 40Cr, surface chrome coated, thickness 0.05mm
d) The way of width adjust: straight track, silk pole, reducer
motor adjustable
e) structrue: arm type adjustable, support roller in the middle
f) shaft diameter: 50mm
1.5 Pre-heating Room
a) hot air motor: 18.5Kw
b) hot air heater: 200Kw
c) temperature sensor: hot couple
d) temperature adjustment: automatic control by temperature control
equipment
e) heat type: heated by electricity and air circulate
1.6 Double belt machine
a) effective working length: 24m
b) length & width of double belt: 1400mm x 267mm
c) double belt material: alloy steel
d) double belt thickness: 14mm
1.7 Band Saw Cutting Machine
a) run speed of band saw: 1000-1500rpm
b) rotate diameter of band saw: 550mm
c) cutting speed of band saw: 50m/min-1000m/min
d) width of band saw: 30mm
e) length of band saw: 3000mm-4000mm
f) transverse move distance: 1500mm
g) cut length on line: 3000mm
PU Sandwich Panel Main Components
No. | Machine Name |
|
1. | Roll forming machine for wall and roof panel | 4 Sets |
2. | Steel sheet transverse cutting machine, steel sheet surface PVC
film covering device | 2 Sets |
3. | Un-coiler 10 TONS | 2 sets |
4. | Panel pre-heat equipment | 1 set |
5. | PU/PIR 2 component Liquid mixing and injecting section for foaming
with high pressure (with Singapore brand) | 1 set |
6. | 24m double belt machine include Hydraulic pressure control system with 4 sets side nylon seal blocks to make different thickness of
wall panel and roof panel | 1 set |
7. | Heating and heat insulation system | 1 set |
8. | Automatic Panel Bandsaw Cutting Machine | 1 set |
9. | Automatic Vacuum stacking machine and wrapping machine | 2 sets |
10. | Cooling conveyer | 1 set |
11. | Cowper stove 0.5 ton | 1 set |
12. | Air compressor and tank 2 m3 | 1 set |
13. | PU Foaming machines (Singapore Brand) | 1 set |
Advantage for PU Sandwich Panel
1. Reasonable Price
2. High Quality
3. 12 Months Warranty
4. More Than 10 Years Experience
5. Durable
6. Reliable
Working Flow of PU Sandwich Panel
Profiles of PU Sandwich Panel
Packaging & Delivery
Packaging Details:naked
Payment Terms:The payment shall be made by L/C or T/T(30% down payment and the
balance for 70% shall be paid before container loading at the
seller`s factory when the buyer check the machine
Delivery Time:90-110 days after deposit
We will attend PERU ARCON Expo
Time:4th-7th,July,2018
Address: Lima Jokey Plaza International Exhibition Center
