380mm-600mm Width PU Foam Exterior Interior Sandwich Production
Line with 10mm-20mm Thickness
Primary technology parameters product line:
- PU foam thickness: 16mm, aluminum and galvanized coil thickness
0.27-0.5mm
- Linear Speed of production: 16m/min
- Maximum Roller Forming speed:20 m/min
- Reciprocating times of injection head per minute<60
- Production type: totally continuous production with PLC controlling
- Composite structure:position fixed by double Aluminum block tracker
- Foaming system: totally automatically continuous foaming, quantity
of foaming could be stepless adjustable
- Main Power of production 100KW
- Cutting: pneumatic piston driving, non-stop cutting via sliding
table
- Electronic controlling system: full-frequency PLC controlling
system.
| Motor Power | Up Panel 4KW,Down Panel 7.5KW |
| Speed of roll forming | 1.5-12m/min |
| Material of roller | 40Cr |
| Width Adjustable range | 600-1250mm |
| Sheet thickness | 0.4-0.8mm |
| Diameter of the shaft | 50mm |
| Hardness of shaft | HB220-250° |
| Transmission equipment | cycloid redcking gear box |
| Roll station | according to the panel profile |
Machine list
| No. | Machine Name | |
| 1 | Un-coiler Hydraulic 5 TONS | 2 Sets |
| 2 | Steel sheet transverse cutting machine, steel sheet surface PVC
film covering device | 2 Sets |
| 3 | Roll forming machine for wall panel and Roof panel | 2 sets |
| 4 | Panel pre-heat equipment | 1 set |
| 5 | PU 2 component Liquid mixing and injecting section for foaming with
high pressure | 1 set |
| 6 | 24m double belt machine include Hydraulic pressure control system With 4 sets side nylon seal blocks to make different thickness of
wall panel and roof panel | 1 set |
| 7 | Heating and heat insulation system | 1 set |
| 8 | automatic Panel Band saw Cutting Machine | 1 set |
| 9 | Cooling conveyer | 1 set |
| 10 | Air compressor and tank 2 m3 | 1 set |
| 11 | 12 meters auto stacker | 1 set |
| Price: FOB SHANGHAI PORT | $498,000 |
Profile drawing
Machine picture
Sussman hereby solemnly promises: We implement the “three guarantees”
service policy for any equipment sold by Sussman, provide free of charge installation guidelines, commissioning and
maintenance of the equipment, training of the Buyer’s relevant
Operators; and provide technical requirements for the installation
and operation of the equipment, technical layout diagrams and other
related information, provide a lifetime supply of maintenance and
spare parts
The detailed measures are as follows:
1.Guidelines for installation and commissioning of equipment:
Based on the actual situation, to assist and guide the Buyer and
Buyer’s technical personnel in the overall installation location,
the installation of equipment, and provide Buyer with answers to
their questions and related issues;
2.Provide training for operation and maintenance personnel:
Based on the Buyer’s request, Sussman will provide free of charge training of the operation and
maintenance personnel;
a) The User (Buyer) can send their operation and maintenance
personnel to our factory for learning and training;
b) When Sussman is doing the installation and test running of the equipment for the
Buyer, the Buyer can send their personnel to participate.
3.If failure occurs in any of the machines during the “three
guarantees” period(one year), then, upon the Buyer’s request, Sussman will eliminate the failure;
4. Sussman will inform all its Buyers about any upgrades and significant
product improvements. Sussman will provide equipment modifications based on their costs. Sussman will provide Buyers with high-quality after-sales services in a
careful and responsible attitude, provide very strong guarantee for
the Buyer’s normal production.
We provide quick and satisfactory customer service, and promise to
respond within 24 hours after receiving your complaints by phone or
email
